Electrical Business

Products Wiring - Cabling - Devices

FSR expands Project Wall Box line with 2016’s PWB-450

August 9, 2016 | By Renée Francoeur

August 9, 2016 – FSR is expanding its Project Wall Box line (PWB) with the upgraded PWB-450, designed for applications where users need to mount larger interfaces or equipment in a wall box behind a display or in other custom applications.

It mounts in a typical 4-in. deep wall between the studs in a 16-in. stud bay. The cover, flush to the wall, is ventilated top and bottom to provide convection cooling as well as a cable exit slot to pass cables from the box to the display. Its optional bracketry has also been designed to mount Crestron’s larger DM-RMC-4K-SCALER-C 4K receiver/room controller and AMX/SVSi digital interfaces.

Inside the PWB-450 are four pre-wired AC outlets along one vertical side of the box which are isolated from the four accessory plate mounting brackets. There is a 1⁄2-3⁄4-in. concentric KO on the top and bottom of the box for the AC conduit connections.


Print this page


Stories continue below