Electrical Business

Products Wiring - Cabling - Devices

Hammond Manufacturing’s 1487SS wireway for corrosive environments

September 12, 2016 | By Renée Francoeur

September 12, 2016 – The 1487SS modular pull-through wireway system from Hammond Manufacturing is made up of three cross-section sizes: 4 x 4 in., 6 x 6 in. and 8 x 8 in., all with a brushed stainless steel finish.

Components are available in standard 12-, 24-, 36-, 48-, 60- and 120-in. straight lengths with a range of fittings.

The 1487SS system sections are formed from 14 gauge, 304 stainless steel and are fitted with 10 gauge flanges at each end. The top of each straight section consists of a hinged cover, secured with screw clamps to give access to the cables.

The system is sealed to NEMA Type 4X and IEC60529 IP66, and is designed to enclose and protect electrical or network wiring from dirt, dust, oil and water, making it suitable for use in factories, warehouses, etc.


Print this page


Stories continue below