Electrical Business

Products Tools and Equipment

New Hilti combihammers TE 60-AVR and TE 60-ATC/AVR now use the Hilti Connect App

May 23, 2018 | By Ellen Cools

The Hlti TE 60-AVR Courtesy Hilti

May 23, 2018 — Hilti says its new SDS-max combinhammers TE 60-AVR and TE 60-ATC/AVR are the first to use the Hilti Connect App, which lets contractors use NFC-enabled devices to access information and remotely send a request for repair.

Both combihammers feature Active Vibration Reduction (AVR). The TE 60-ATC/AVR model also comes with an Active Torque Control (ATC) system that stops the motor if the bit binds and the housing begins to rotate too quickly. They also feature a detachable power cord which snaps out if too much tension is applied and can be reconnected for field replacement of damaged cords.

Delivering 5.8 ft-lbs of impact energy at 3,300 impacts-per-minute, Hilti TE 60s are suited for drilling anchor through-holes in concrete and masonry and more. Both models have an optimum hole range of 11/16 in. up to 1-9/16 in. and a maximum hammer drilling hole diameter of 2 in. and a maximum percussion coring diameter of 4 in.

Print this page


Stories continue below