Electrical Safety 360
October 6, 2017 — Having covered risk assessment procedures (RAPs) for shock & arc flash (i.e. PPE category method) in previous editions, the last RAP to cover in CSA Z462-15 “Workplace electrical safety” is the arc flash incident energy analysis method.
June 28, 2017 - I am regularly asked by professionals from a variety of electrical sectors to help them nail down comprehensive methods for executing safe electrical work practices in real-world scenarios. This is where the rubber hits the road, involving some of the most important interactions between crews and their management teams.
March 14, 2017 - The source of risk assessment procedure best practices that you find in CSA Z462-15 “Workplace electrical safety” (Clause 184.108.40.206) is CAN/CSA-Z1002-12 “Occupational health and safety - Hazard identification and elimination and risk assessment and control”.
December 12, 2016 - In my last column, I addressed the basic theory and concepts behind CSA’s family of occupational health & safety (OH&S) standards. Among them is CSA Z1000 “Occupational health & safety management”, CSA Z463 “Guideline on maintenance of electrical systems”, CSA Z460 “Control of hazardous energy: lockout and other methods” and, of course, CSA Z462 “Workplace electrical safety”.
September 12, 2016 - Did you know the original health and safety management system standard was the British BS OHSAS 18001? This was the precursor to not only CAN/CSA-Z1000 “Occupational health & safety management” but also ANSI/AIHA/ASSE Z10 “Occupational health & safety management systems”, which is used in the United States.
July 7, 2016 - To ensure electrical safety is being observed on the jobsite, it is imperative for supervisors and managers to regularly get in the field and make comprehensive observations and perform audits.
NEMRA Annual Conference 2018
January 31-3, 2018
Electrical Inspectors Assoc. of Alberta 2018 annual conference
February 2-3, 2018
NAILD Innovation Conference 2018
February 13-16, 2018