Electrical Business

Articles Features Articles Code Conundrum Codes & Standards

Code Conundrum February 2025

March 12, 2025 | By Gabriel Bone


Test your knowledge of the Canadian Electrical Code-Part I


March 12, 2025 – Welcome to our new quizmaster, Gabriel, and to the newest round of questions that test your knowledge of the CE Code-Part I. Answers will appear in the April 2025 edition of Electrical Business Magazine, and online at EBMag.com.


QUESTION 1 – When a single dwelling does not have opposite sides, and a receptacle must be located on the adjacent side of the dwelling, what is the minimum spacing between the front-side and adjacent-side receptacles?

a) There is no minimum spacing requirement.
b) No less than 2/3 the width of the longest side.
c) No less than 1/2 the width of the longest side.
d) Centred on the adjacent-side wall, regardless of front-side’s location.

QUESTION 2 – Marking the maximum load on a residential panelboard is not required when the loads are calculated in the apartment building as per Rules 8-200 or 8-202, and the service conductors are rated less than the overcurrent protection.

a) True
b) False

QUESTION 3 – What is the percentage factor for conductors installed for a generator without factory built-in overcurrent?

a) 100%
b) 115%
c) 125%
d) 150%

Advertisement

ANSWERS to Code Conundrum, November 2024 edition.

QUESTION 1 – How many standard 15A duplex receptacles can be installed on a general-purpose branch circuit, fed from a standard 15A circuit breaker?

a) 8
b) 10
c) 12. Rule 8-304(1)(a).
d) unlimited

QUESTION 2 – What is the minimum size grounding conductor required for client’s a 45-kVA 600-120/208 Δ/Y transformer with 60A primary overcurrent HRC fuses, connected to a 200A 4-wire splitter?

a) #6CU
b) #4AL
c) #3CU
d) None of the above. Rule 10-212(2).

QUESTION 3 – What is the minimum height from the floor for a receptacle that is intended to connect to an emergency battery pack with two lamps for illuminating the area upon loss of power?

a) 2.5 m. Rule 46-304(1).
b) 3 m
c) 1.7 m
d) 1.5 m


How did you do?

Advertisement

3 • Seasoned journeyman
2 • Need refresher training
1 • Apprentice
0 • Just here for fun!


Gabriel Bone is technical training developer with Ontario’s Electrical Safety Authority.

You’ll find all Back Issues of Electrical Business Magazine in our Digital Archive.


Print this page

Advertisement

Stories continue below